wooden case of the wood sawdust pallet Block machine
15-25 working days after got the payment
Wood Sawdust Pallet Block Making Machine
1 Wood Log Crusher To Make Wood Into Sawdust First
If the materials log is bigger than 5*5mm(,smaller than 200mm,there is necessary to crush the material into 5*5mm for further processing.
2.Wood Powder/Sawdust Dryer-------1 pc
Materials (The diameter of the materials <5 mm)
sawdust, rice hull, milled wheat straw, corn stalks and so on.
if the moist rate is about 12%, it does need to dry the sawdust if the moist rate of wood sawdust is above 12-30%, the drying machine is needed to dry the moisture to 8%-12%.
In the sawdust dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and mateirls suspending in air stream, the heat transfter surface between air and raw mateiral is large, so the heat transfer rate is high.
The diameter of the materials(mm)
The temperature of the heating air(℃)
3. Glue Mixer ----To Mix Sawdust With Glue
You can useurea-formaldehyde resins ,but urea-formaldehyde resins has a certain expiration date , and urea-formaldehyde resins is expensive . so you can buy glue powder to mix with certain water . then you can get glue water
1.Equipment disposition: Generally four hot presses are a production line, must provide the dryer, the gluing machine, grinder e ach. (dryer, gluing machine, grinder and so on supporting facility customer buys in addition).
2.Personnel disposition: Production personnels 4/5 person of/classes. And raw material sort (screening)drying, spreads 2/3 pe ople, looked that machine 2 people (a person may look at two machines).
3.Production cycle: After confirmation order form and payment advanced payment, 40 supe r craftmanship factory delivery. Equipment investment recoupment period: 10/12 months.
4.This factory is responsible for the technical training, and provides the consummation the post-sale service.